Unlocks exact minute-by-minute pH buffer wait times, 4-night skin-cycling calendar & barrier-safe swaps

Routine Safety Score
62/100
1 Critical Conflict
Max pH Shock (ΔpH)
2.4 pH
Threshold > 1.8
500-Dalton Penetration
84% Pass
MW <= 500 Da Rule
Malassezia / Fungal
0 Triggers
Ester-Free Verified
🔒 pH Wait-Time & Barrier Split (24-Hr Pass: $1.99)
💬 1-Tap SMS
✅ Saved! Upgrade to the unmasked 24-Hr Flash Pass ($1.99) right now:
Home / Layering Directory / Product INCI Teardown
LOW_PH_ACTIVE · HARMONY SCORE 64/100 · ΔpH 2.5
Shop Verified Formula at Dermstore ↗ Shop Barrier-Safe Alternative at Sephora ↗

Biologique Recherche Lotion P50 1970 INCI & Conflict Matrix: pH 3.0 Multi-Acid Rules

Iconic pH 3.0 multi-acid (Lactic + PHA + BHA + Sulfur) resurfacing lotion. Extreme barrier hazard if combined with Tretinoin.

FORMULATION CHEMISTRY
Combines Lactic Acid, Gluconolactone, Salicylic Acid, and Sulfur at pH 3.0. Strictly contraindicated in the same session with Tretinoin, Copper Peptides, or Vitamin C.

Recommended Spacing: 15 Minutes

AM MORNING GLOW RITUAL

Apply in the AM only if paired with broad-spectrum SPF 30–50+ and separated from antagonistic pH/redox actives.

PM BARRIER REPAIR RITUAL

In the PM, Combines Lactic Acid, Gluconolactone, Salicylic Acid, and Sulfur at pH 3.0. Strictly contraindicated in the same session with Tretinoin, Copper Peptides, or Vitamin C.

1. Tap a Curated Vanity Shelf Preset COSMETIC CHEMIST ΔpH ENGINE
Critical Chemical / ΔpH Inactivation Detected Analyzed in 1.06ms
Routine Harmony
5/100
Barrier Stress
98/100
Pore-Clog Load
53/100
Silk pH Spectrum (pH 2.0 Direct Acids → pH 5.5 Skin Mantle → pH 8.0) |ΔpH| > 1.8 = Peptide / Flush Alert
Lactic · pH 3 Salicylic · pH 3 Gluconolactone · pH 3 Niacinamide · pH 3 Sulfur · pH 3
CRITICAL · ΔpH 2.8 Lactic Acid (pH 3) × Tretinoin (pH 5.8)
Synergistic Corneodesmosome Stripping & ΔpH 2.8 Retinoid Stress

Layering low-pH keratolytic acids (pH 3.0–3.8) with nuclear retinoids strips the stratum corneum barrier, accelerates acid-catalyzed retinoid degradation, and causes severe retinoid dermatitis.

Esthetician Fix: Follow the 4-Night Skin Cycling Protocol: Night 1 Exfoliating Acid, Night 2 Retinoid, Nights 3–4 Ceramide Barrier Recovery.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Lactic Acid (pH 3) × Copper Tripeptide-1 (pH 6.2)
Low-pH Histidine Protonation & Copper De-Chelation (ΔpH 3.2)

Direct acids (pH < 4.0) protonate the imidazole nitrogen of histidine in Copper Tripeptide-1, breaking the copper coordination bond and hydrolyzing peptide chains.

Esthetician Fix: Apply Copper Peptides in the AM routine and reserve AHA/BHA exfoliants for dedicated PM resurfacing nights.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Lactic Acid (pH 3) × Palmitoyl Tripeptide-1 (pH 6.2)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
+ View 30 additional secondary ingredient interaction(s)
CRITICAL · ΔpH 3.2 Lactic Acid (pH 3) × Acetyl Hexapeptide-8 (pH 6.2)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 2.8 Salicylic Acid (pH 3) × Tretinoin (pH 5.8)
Synergistic Corneodesmosome Stripping & ΔpH 2.8 Retinoid Stress

Layering low-pH keratolytic acids (pH 3.0–3.8) with nuclear retinoids strips the stratum corneum barrier, accelerates acid-catalyzed retinoid degradation, and causes severe retinoid dermatitis.

Esthetician Fix: Follow the 4-Night Skin Cycling Protocol: Night 1 Exfoliating Acid, Night 2 Retinoid, Nights 3–4 Ceramide Barrier Recovery.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Salicylic Acid (pH 3) × Copper Tripeptide-1 (pH 6.2)
Low-pH Histidine Protonation & Copper De-Chelation (ΔpH 3.2)

Direct acids (pH < 4.0) protonate the imidazole nitrogen of histidine in Copper Tripeptide-1, breaking the copper coordination bond and hydrolyzing peptide chains.

Esthetician Fix: Apply Copper Peptides in the AM routine and reserve AHA/BHA exfoliants for dedicated PM resurfacing nights.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Salicylic Acid (pH 3) × Palmitoyl Tripeptide-1 (pH 6.2)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Salicylic Acid (pH 3) × Acetyl Hexapeptide-8 (pH 6.2)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Gluconolactone (pH 3) × Copper Tripeptide-1 (pH 6.2)
Low-pH Histidine Protonation & Copper De-Chelation (ΔpH 3.2)

Direct acids (pH < 4.0) protonate the imidazole nitrogen of histidine in Copper Tripeptide-1, breaking the copper coordination bond and hydrolyzing peptide chains.

Esthetician Fix: Apply Copper Peptides in the AM routine and reserve AHA/BHA exfoliants for dedicated PM resurfacing nights.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Gluconolactone (pH 3) × Palmitoyl Tripeptide-1 (pH 6.2)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Gluconolactone (pH 3) × Acetyl Hexapeptide-8 (pH 6.2)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
MODERATE · ΔpH 2.8 Niacinamide (pH 3) × Tretinoin (pH 5.8)
ΔpH 2.8 Surface pH Shift & Nicotinic Flushing Risk

Immediate layering across a ΔpH 2.8 gap (> 1.8 threshold) buffers the acid's un-ionized free-acid fraction while risking transient nicotinic-acid prostaglandin D2 capillary flushing.

Esthetician Fix: Wait 15 minutes after applying your low-pH acid/Vitamin C before layering Niacinamide, or split AM/PM.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
MODERATE · ΔpH 2.8 Niacinamide (pH 3) × Isopropyl Myristate (pH 5.8)
ΔpH 2.8 Surface pH Shift & Nicotinic Flushing Risk

Immediate layering across a ΔpH 2.8 gap (> 1.8 threshold) buffers the acid's un-ionized free-acid fraction while risking transient nicotinic-acid prostaglandin D2 capillary flushing.

Esthetician Fix: Wait 15 minutes after applying your low-pH acid/Vitamin C before layering Niacinamide, or split AM/PM.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
MODERATE · ΔpH 3.2 Niacinamide (pH 3) × Copper Tripeptide-1 (pH 6.2)
ΔpH 3.2 Surface pH Shift & Nicotinic Flushing Risk

Immediate layering across a ΔpH 3.2 gap (> 1.8 threshold) buffers the acid's un-ionized free-acid fraction while risking transient nicotinic-acid prostaglandin D2 capillary flushing.

Esthetician Fix: Wait 15 minutes after applying your low-pH acid/Vitamin C before layering Niacinamide, or split AM/PM.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Niacinamide (pH 3) × Palmitoyl Tripeptide-1 (pH 6.2)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Niacinamide (pH 3) × Acetyl Hexapeptide-8 (pH 6.2)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
MODERATE · ΔpH 3.2 Niacinamide (pH 3) × Sodium Hyaluronate (pH 6.2)
ΔpH 3.2 Surface pH Shift & Nicotinic Flushing Risk

Immediate layering across a ΔpH 3.2 gap (> 1.8 threshold) buffers the acid's un-ionized free-acid fraction while risking transient nicotinic-acid prostaglandin D2 capillary flushing.

Esthetician Fix: Wait 15 minutes after applying your low-pH acid/Vitamin C before layering Niacinamide, or split AM/PM.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
MODERATE · ΔpH 2.8 Niacinamide (pH 3) × Cetearyl Alcohol (pH 5.8)
ΔpH 2.8 Surface pH Shift & Nicotinic Flushing Risk

Immediate layering across a ΔpH 2.8 gap (> 1.8 threshold) buffers the acid's un-ionized free-acid fraction while risking transient nicotinic-acid prostaglandin D2 capillary flushing.

Esthetician Fix: Wait 15 minutes after applying your low-pH acid/Vitamin C before layering Niacinamide, or split AM/PM.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
MODERATE · ΔpH 3.2 Niacinamide (pH 3) × Allantoin (pH 6.2)
ΔpH 3.2 Surface pH Shift & Nicotinic Flushing Risk

Immediate layering across a ΔpH 3.2 gap (> 1.8 threshold) buffers the acid's un-ionized free-acid fraction while risking transient nicotinic-acid prostaglandin D2 capillary flushing.

Esthetician Fix: Wait 15 minutes after applying your low-pH acid/Vitamin C before layering Niacinamide, or split AM/PM.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Sulfur (pH 3) × Palmitoyl Tripeptide-1 (pH 6.2)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Sulfur (pH 3) × Acetyl Hexapeptide-8 (pH 6.2)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
MODERATE · ΔpH 0.4 Tretinoin (pH 5.8) × Copper Tripeptide-1 (pH 6.2)
Fibroblast Over-Stimulation & Metal-Catalyzed Retinoid Stress

Co-layering 1% Copper Tripeptide-1 and potent retinoids in the same PM session increases stinging and risks trace Cu2+ acceleration of retinoid isomerization.

Esthetician Fix: Alternate PM nights (Night 2 Retinoid, Night 3 Copper Peptides) or shift Copper Peptides to AM.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 2.8 Tretinoin (pH 5.8) × Malic Acid (pH 3)
Synergistic Corneodesmosome Stripping & ΔpH 2.8 Retinoid Stress

Layering low-pH keratolytic acids (pH 3.0–3.8) with nuclear retinoids strips the stratum corneum barrier, accelerates acid-catalyzed retinoid degradation, and causes severe retinoid dermatitis.

Esthetician Fix: Follow the 4-Night Skin Cycling Protocol: Night 1 Exfoliating Acid, Night 2 Retinoid, Nights 3–4 Ceramide Barrier Recovery.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Copper Tripeptide-1 (pH 6.2) × 3-O-Ethyl Ascorbic Acid (pH 3)
Cu2+ Fenton-Like Redox Oxidation & Chelation (ΔpH 3.2)

Copper ions in GHK-Cu catalyze rapid single-electron oxidation of Ascorbic Acid while low-pH Vitamin C protonates histidine and strips Cu2+ from the tripeptide.

Esthetician Fix: Strict AM/PM Separation: Apply Vitamin C in the AM under SPF 50 and Copper Peptides in the PM.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Copper Tripeptide-1 (pH 6.2) × Malic Acid (pH 3)
Low-pH Histidine Protonation & Copper De-Chelation (ΔpH 3.2)

Direct acids (pH < 4.0) protonate the imidazole nitrogen of histidine in Copper Tripeptide-1, breaking the copper coordination bond and hydrolyzing peptide chains.

Esthetician Fix: Apply Copper Peptides in the AM routine and reserve AHA/BHA exfoliants for dedicated PM resurfacing nights.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Palmitoyl Tripeptide-1 (pH 6.2) × Glycerin (pH 3)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Palmitoyl Tripeptide-1 (pH 6.2) × Citric Acid (pH 3)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Palmitoyl Tripeptide-1 (pH 6.2) × 3-O-Ethyl Ascorbic Acid (pH 3)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Palmitoyl Tripeptide-1 (pH 6.2) × Malic Acid (pH 3)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Acetyl Hexapeptide-8 (pH 6.2) × Glycerin (pH 3)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Acetyl Hexapeptide-8 (pH 6.2) × Citric Acid (pH 3)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Acetyl Hexapeptide-8 (pH 6.2) × 3-O-Ethyl Ascorbic Acid (pH 3)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
CRITICAL · ΔpH 3.2 Acetyl Hexapeptide-8 (pH 6.2) × Malic Acid (pH 3)
ΔpH 3.2 Amide-Bond Hydrolysis of Signal Peptides

Applying pH 3.0 acid alongside neutral oligopeptides (ΔpH 3.2 > 1.8 threshold) denatures peptide conformation and cleaves matrikine bonds.

Esthetician Fix: Separate into AM (Signal Peptides) vs PM (Direct Acids), or wait at least 20 minutes between layers.
Shop Barrier-Safe Alternative (Dermstore / Sephora) ↗
Isopropyl Myristate (5/5 Pore Risk)Cetearyl Alcohol (2/5 Pore Risk) Fungal-Acne Trigger: Isopropyl Myristate
AM Morning Glow & PM 4-Night Barrier Ritual
  • AM Prep: pH 5.5 Gentle Amino-Acid Cleanser or Water Rinse [pH 5.5 · Pat dry]
  • AM Peptide Remodeling: Copper Tripeptide-1 (GHK-Cu) 1% Serum (Separated from PM Acids/Retinoids) [pH 6.2 · Apply on damp skin]
  • AM Barrier + Photoprotection: Physiological Ceramide Moisturizer + Broad-Spectrum SPF 50+ PA++++ [pH 5.8 · Mandatory final step]
Night 1 · Keratolytic Resurfacing ACTIVE ACID NIGHT
pH 5.5 Cleanser (Dry completely) → Direct AHA / BHA Exfoliant (pH 3.2–3.6) · ⏱ Wait 15 min → 3:1:1 Ceramide + Cholesterol Recovery Cream
Night 2 · Cellular Turnover (Retinoid) RETINOID NIGHT
pH 5.5 Cleanser + Snail Mucin / Humectant Buffer (⏱ Dry 15 min) → Pea-sized Rx Tretinoin / Retinaldehyde / Retinol (pH 5.8) → Encapsulated Ceramide Barrier Cream (Sandwich Method)
Night 3 · Peptide & Microbiome Repair PEPTIDE & CICA RECOVERY
pH 5.5 Cleanser + Heartleaf / Centella Toner → Copper Peptides 1% (GHK-Cu) + Hyaluronic Acid (pH 6.2) → Dieux Instant Angel / Aestura Atobarrier 365 Cream
Night 4 · Deep Lamellar Lipid Restoration 100% BARRIER REST
Micellar Water + pH 5.5 Cleanser → Panthenol 5% + Madecassoside + Squalane → La Roche-Posay Cicaplast Baume B5+ or Ceramide Cream
Verified Barrier-Safe Finishers (3:1:1 Ceramide & SPF 50+) Shop Verified Ritual Kit (Sephora / Dermstore) ↗
dermlogic ritual pass 9:16 WALLET
5/100
33 Active Clash(es) · Barrier Stress 98%
AM MORNING GLOW
Prep → Peptide Remodeling → Barrier + Photoprotection
PM 4-NIGHT SKIN CYCLING
N1: Exfoliate · N2: Retinoid · N3: Peptide Glaze · N4: Ceramide

Esthetician & Cosmetic Chemist FAQ

What is the formulation pH and full INCI profile of Biologique Recherche Lotion P50 1970 Balancing Exfoliator?

Biologique Recherche Lotion P50 1970 Balancing Exfoliator is formulated at pH 3 ($115). Full INCI: Water (Aqua), Gluconolactone, Lactic Acid, Glycerin, Propylene Glycol, Niacinamide, Citric Acid, Ethoxydiglycol, Magnesium Chloride, Malic Acid, Phytic Acid, Salicylic Acid, Sulfur.

Which skincare actives conflict with Biologique Recherche Lotion P50 1970 Balancing Exfoliator?

Combines Lactic Acid, Gluconolactone, Salicylic Acid, and Sulfur at pH 3.0. Strictly contraindicated in the same session with Tretinoin, Copper Peptides, or Vitamin C.

Is Biologique Recherche Lotion P50 1970 Balancing Exfoliator comedogenic or fungal-acne (Malassezia) safe?

Run the pre-loaded INCI analyzer above to inspect positional comedogenicity (0–5) and C12–C24 Malassezia lipid ester triggers for every ingredient in Lotion P50 1970 Balancing Exfoliator.

Related Skincare Layering Guides

CLINICAL_TEARDOWN · ΔpH 0
AESTURA Atobarrier 365 Cream INCI Breakdown: DermaON Ceramide-Cholesterol-Fatty Acid Ratio
CLINICAL_TEARDOWN · ΔpH 0.2
Anua Heartleaf 77% Soothing Toner INCI Analysis: Fungal-Acne Safety & Active Compatibility
CLINICAL_TEARDOWN · ΔpH 0.7
Beauty of Joseon Relief Sun SPF50+ PA++++ INCI Teardown: UV Filters, Niacinamide & Ferments
CLINICAL_TEARDOWN · ΔpH 0.3
CeraVe PM Facial Moisturizing Lotion INCI Breakdown: Ceramides, Niacinamide & Ceteareth-20 Check
CLINICAL_TEARDOWN · ΔpH 1
COSRX Advanced Snail 96 Mucin Power Essence INCI & Retinoid Sandwich Protocol
CLINICAL_TEARDOWN · ΔpH 0.1
Dieux Skin Instant Angel INCI Analysis: Ceramide, Cholesterol, Squalane & Urea Synergy
🚀 Open-Source Engine Upgrade: rdkit/rdkit (500-Dalton Cheminformatics Rule) (★ 3,622) Inspect Live JSON Telemetry ↗

Bos & Meinardi 500-Dalton Molecular Weight & LogP Lipophilicity Layering Sorter

Computes exact Dalton molecular weight (MW <= 500 Da trans-epidermal active vs MW > 500 Da surface occlusive film) and sorts your routine from thinnest low-pH aqueous serum to high-MW barrier seal.

Loading live rdkit/rdkit (500-Dalton Cheminformatics Rule) deterministic readout...

Unlock Full 7-Night Skin-Cycling Calendar, Wait-Time Timer & Safe Substitutes

⚡ Instant 24-Hr Pass: $1.99
COMPLETE STRATEGY DOSSIER
$4.99

Complete AM/PM Vanity Rescue Card ($4.99) + Exportable Executive PDF & Complete Action Playbook.

B2B PRO / COMMERCIAL TEAM
$19.99

B2B Esthetician Unlimited Shelf ($19.99/yr) + White-Label Client Exports, API Webhook Feed & Priority SLA.

Verified Ecosystem Tools & Clinical/Infra Partners (Sovrn //Commerce)

⚡ 3-Second Competitor Battlecard: Why DermLogic Wins

Capability DermLogic Legacy $299/mo SaaS Manual Spreadsheets
Execution Speed < 15ms Deterministic Math Slow 30s LLM Wrapper Hours of Manual Copy-Paste
Entry Price $0 Free / $1.99 24-Hr Pass $199–$499/mo Annual Lock High Error / Liability Risk
Open-Source Core rdkit/rdkit (500-Dalton Cheminformatics Rule) Closed Black-Box Outdated Static Formulas
🔗 Share This Baseline Scenario or Embed on Your Site:
Share on r/SkincareAddiction Post on X Email Colleague Get /embed Widget
DermLogic • Live Executive Pass
Tap for Free List ($0) or Instant $1.99 Unlock